Volvo XC90 Twin Engine 2019, Руководство пользователя

Страница: 579 / 700

WHEELS AND TYRES
}}
* Option/accessory. 577
Removing a wheel
Wheel changes must always be performed cor-
rectly. Instructions on how a wheel is undone
and what is important to remember are provided
below.
IMPORTANT
•
When the jack
*
is not in use it must be
stored in its storage space under the
cargo area floor.
•
The jack included with the car is only
designed for occasional, short-term use,
such as when changing a wheel after a
puncture. Only the jack belonging to the
specific model is to be used to jack up
the car. If the car is to be jacked up more
often, or for a longer time than is required
just to change a wheel, use of a garage
jack is recommended. In this instance,
follow the instructions for use that come
with the equipment.
WARNING
•
Apply the parking brake and set the gear
selector in Park position (
P ).
•
Chock the wheels standing on the ground
using solid wood blocks or large stones.
•
Check that the jack is not damaged, that
the threads are thoroughly lubricated and
that it is free from dirt.
•
Check that the jack is resting on a firm,
level surface that is not slippery and is
not slanted.
•
The jack must be correctly attached in
the jack's bracket.
•
Never position anything between the
ground and the jack, nor between the
jack and the car's jacking point.
•
Passengers must leave the car when it is
raised on the jack.
•
If a wheel must be changed in a traf-
ficked environment, passengers must
stand in a safe place.
•
Use a jack designed for the car when
changing tyres. Use supports to secure
the car for all other work.
•
Never crawl under the car or reach under
with a part of your body when it is raised
on a jack.
1. Set up the warning triangle and activate the
hazard warning lights if a tyre is being
changed in a trafficked location.
2. Apply the parking brake and engage gear
position P , or engage first gear if the car has
a manual gearbox.
Applies to cars with Leveling Control
*
: If
the car is equipped with air suspension, this
must be disabled before the car is raised
with a jack
*
.
3. Take out the jack
*
, wheel wrench
*
and tools
for the wheel bolts' plastic caps that are fitted
in the foam block.
Tool for removing the plastic caps on the wheel bolts.
4. Chock in front of and behind the wheels that
remain on the ground. Use, for example,
heavy wooden blocks or large stones.