Volvo XC90 Twin Engine 2019, Руководство пользователя

Страница: 157 / 700

LIGHTING
}}
155
Adaptive functionality: Dipped beam directly towards
oncoming vehicle, but continued main beam on both
sides of the vehicle.
The main beam is partly dimmed, i.e. if the light
beam shines with slightly more than dipped
beam, the symbol
in the driver display
shines blue.
Limitations for active main beam
The camera sensor on which the function is
based has limitations.
If this symbol is shown in the driver dis-
play, together with the message
Active
High Beam Temporarily
unavailable , then switching between
main and dipped beam must be performed man-
ually. The
symbol extinguishes when these
message are shown.
The same applies if this symbol is
shown together with the message
Windscreen sensor Sensor
blocked, see Owner's manual .
Active main beam may be temporarily unavailable
e.g. in situations with dense fog or heavy rain.
When active main beam becomes available again,
or the windscreen sensors are no longer blocked,
the message goes out and the
symbol illu-
minates.
WARNING
Active main beam is an aid for using the opti-
mum beam pattern when conditions are
favourable.
The driver always bears responsibility for man-
ually switching between main and dipped
beam when traffic situations or weather con-
ditions so require.
Related information
•
Lighting control (p. 150)
•
Using main beam (p. 153)
•
Limitations for camera and radar unit
(p. 341)
Using direction indicators
The car's direction indicators are operated with
the left-hand stalk switch. The direction indicator
lamps flash three times or continuously, depend-
ing on how far up or down the stalk switch is
moved.
Direction indicators.
Short flash sequence
Move the stalk switch up or down to the first
position and release. The direction indicator
lamps flash three times. If the function is
deactivated via the centre display, the lamps
will flash once.