Volvo V60 Twin Engine, Руководство пользователя

Страница: 329 / 440

WHEELS AND TYRES
}}
* Option/accessory, for more information, see Introduction. 327
3. Take out the jack
*
, tool to remove the plastic
caps on the wheel bolts and the wheel
wrench
* (located in a bag on the cargo area
floor). If another jack is selected, see Raising
the car (p. 355).
Tool for removing the plastic caps on the wheel bolts.
WARNING
Check that the jack is not damaged, that the
threads are thoroughly lubricated and that it is
free from dirt.
NOTE
•
If the car is not equipped with the acces-
sory spare wheel then the jack need not
be stored in the car.
•
Volvo recommends only using the jack *
that belongs to the car model in question,
which is indicated on the jack's label.
•
The decal also indicates the jack's maxi-
mum lift capacity at a specified lifting
height.
4. Set up the warning triangle (p. 330) if a
wheel is replaced in a trafficked location. The
car and jack
*
must be on a firm horizontal
surface.
Removing
1. Apply the parking brake (p. 283) and engage
reverse gear, or position P if the car has an
automatic gearbox.
2. Place chocks in front of and behind the
wheels which will remain on the ground to
prevent them from rolling. Use heavy wooden
blocks or large stones for example.
3. Screw together the towing eye with the
wheel wrench
*
until the stop position in
accordance with the following figure.
IMPORTANT
The towing eye must be screwed all the way
into the wheel bolt wrench.
4. Remove the plastic caps from the wheel
bolts with the intended tool.
5. Loosen the wheel bolts ½-1 turn anticlock-
wise with the wheel wrench * .