Volvo ROADANDTRAFFICINFORMATIONSYSTEM(RTI), Руководство по эксплуатации

Страница: 12 / 76

11
Introduction
On
The ignition key must be in position I or II.
Press on one of the buttons on the remote
control or the steering wheel keypad. The
system may need several seconds to sense
the car’s position and motion when you have
turned on the ignition.
Off
Scroll the navigator to [
Shut down
] and press
ENTER.
NOTE! The system is also accessible when
the engine is switched off. Remember to turn
the ignition key to position 0 when the system
is not being used as the battery can
otherwise discharge.
Basic functions
Navigator - Moving up, down, right or left
between different menu options.
ENTER - Confirms or activates options.
BACK - Return to menu structure or to undo
a choice.
NOTE! The remote control has the same
functions as the keypad.
Quick start
Guidance to street address
1. Start from main menu. Select Destination
and press ENTER.
2. Select
Street address
and press ENTER.
3. Scroll the navigator to the required
letters to specify the country and city for
the street address.
4. If the selected address has a street
number then this can also be stated to
obtain a more precise navigation. Instead
of street number, a junction (crossroads)
can be specified.
5. Select
Start guidance
and press ENTER.
In a few seconds the system calculates the
route and distance to the destination entered.
The system guides to the specified desti-
nation and provides voice messages on route
options and junctions.
For smaller localities there are no street
addresses stored in the system. The centre of
the locality should always be selected as the
destination.
Guidance to facility
1. Start from main menu. Select Desti-
nation
. Press ENTER.
2. Select
Facilities
and press ENTER.
Select Facilities in the submenu and
press ENTER.
3. Scroll the navigator to the required
letters to specify the country and city for
the facility. Press ENTER.
4. Choose type of facility, such as petrol
station, restaurant or Volvo Dealer. Scroll
DOWN to the list. Select facility type
with UP or DOWN and press ENTER.
5. Scroll DOWN to the list. Select facility
name using UP or DOWN and press
ENTER.
6. Select
Start guidance
and press ENTER.
In a few seconds the system calculates the
route and distance to the destination entered.
The system guides to the specified facility
and gives voice messages on route options
and junctions.
RTI.book Page 11 Tuesday, February 26, 2008 1:29 PM