6A
IMG-282406
6B
IMG-282409
Install the spacer in the bottom of the holder. Ensure that the
holder's two screw turrets align between the small pins in the
oblong holes in the spacer.
A click should be heard when the spacer is securely in position.
7
IMG-282410
Place the connector in the bottom of the holder so that:
the guide hole (1) in the connector's circuit board aligns in the
corresponding pin at the bottom of the holder
the holes (2) in the circuit board are over the holder's screw
turret.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 30756311 - V1.4
Page 7 / 71
