73
IMG-282410
Place the connector in the bottom of the holder so that:
the guide hole (1) in the connector's circuit board aligns in the
corresponding pin at the bottom of the holder
the holes (2) in the circuit board are over the holder's screw
turret.
74
IMG-282411
Take the small torx screws and carefully tighten the connector to
the holder. Ensure that the connector's circuit board is properly
against the screw turret and that there is no play.
Remove the butyl tape from the screws.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Navigation system, portable- 30756311 - V1.4
Page 41 / 71
