10
IMG-231560
Remove the protective backing tape from the template and
secure the template edge to edge with the front edge of the front
wing and embossing in the bumper shell as illustrated.
11
IMG-231563
Take a sharp knife. First make a thin cut along the edges of the
inside of the template. This provides a groove to follow. Then cut
carefully out of the bumper cover.
Note!
Cut carefully. It is easy to slip with the knife and move outside
the template.
Remove the template and tape pieces.
Install the protective cover for the front engine block heater
socket from the kit. Check that it aligns. Adjust the hole using a
knife or file as necessary.
Smooth off the hole edges. Remove any swarf.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V- 31269607 - V1.2
Page 9 / 25