16A
IMG-231566
16B
IMG-231565
Illustrations A and B
Install the attaching brace and nut from the kit.
Rotate the connector for the front engine block heater socket so
that the cover opens backwards (Illustration B).
Plug the electrical connector into the front engine block heater
socket. Use the connector as a counterhold when tightening.
Tighten the front engine block heater socket to the bumper shell.
Press the cable into the holder on the washer fluid reservoir.
Remove the cover on the radiator expansion tank.
17A
IMG-231567
Illustrations A and B
Route the cable with the ground cable from the front engine
block heater socket in front of the left-hand front mounting for
the subframe and down on the inside of the subframe.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V- 31269607 - V1.2
Page 12 / 25