19
IMG-279168
Drain the coolant.
Tighten the nipple after draining.
20
IMG-213921
Remove the retaining clip which holds the plug in the coolant pipe
on the right-hand side above the drive shaft.
Note!
There is a large quantity of coolant in the system so position a
receptacle under the engine.
Pull out the plug and drain the coolant.
Remove the sealing ring in the coolant pipe and check that it is
intact. Replace if necessary.
Lubricate the sealing ring with low temperature grease.
Reinstall the sealing ring in the coolant pipe.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Electric engine heater, 230 V- 31269607 - V1.2
Page 14 / 25