Volvo 2016 S 80, Руководство пользователя

Страница: 331 / 380

10 Maintenance and servicing
10
329
With the wipers in the service position,
fold out the wiper arm from the wind-
shield. Press the button on the wiper
blade attachment and pull the wiper
blade straight out, parallel with the wiper
arm.
Slide in the new wiper blade until it clicks
into place.
Check that the blade is securely in place.
4. Press the wipers back against the wind-
shield.
To return the wipers from the service position
to the normal position, fold the wipers back
against the windshield and press the
START/
STOP ENGINE button briefly to put the igni-
tion in mode I (or start the engine).
Cleaning
Keeping the windshield and wiper blades
clean helps improve visibility and prolongs
the service life of the wiper blades. Clean the
wiper blades with a stiff-bristle brush and
lukewarm soap solution or car washing deter-
gent.
Related information
•
Engine compartment – washer fluid
(p. 329)
•
Wiper blades – service position (p. 327)
Engine compartment – washer fluid
Washer fluid helps keep the windshield and
headlights clean. During cold weather, the
reservoir should be filled with windshield
washer solvent containing antifreeze. Use
Volvo Original Washer Fluid or the equivalent
with a recommended pH value between 6 and
8.
G021764
Location of the washer fluid reservoir
The windshield and headlight washers share
a common reservoir.
The washer fluid reservoir is located on the
driver's side of the engine compartment. For
capacities, see the printed Owner's Manual.
Specification:
Use a washer antifreeze rec-
ommended by Volvo, mixed with water.
Volume:
•
6.8 US qts (6.5 liters)
•
4.7 US qts (4.5 liters
4
)
Related information
•
Wiper blades – service position (p. 327)
4 Models without headlight washers