1976 Volvo 262 264 265
2 Hood hinges
Oil
3 Sun-roof wind deflector
Oil
4 Door lock outer sliding surfaces
Paraffin wax
5 Striker plate
Paraffin wax
6 Trunk lid hinges
Oil
7 Door hinges (upper)
Door Door stops (lower)
Grease
Grease, oil
8 Front seat slide rails and latch devices
Oil
9 Window regulator
Locking device (accessible after door upholstery panels removed)
Oil, grease
Silicon grease
10 Key holes
Lock oil
11 Trunk lid lock
Lock oil
pg. 59 Coolant
Check coolant level
The cooling system must be filled with coolant and not leak to operate at maximum efficiency. Check
the coolant level when filling fuel. The level should be between the "Max" and "Min" marks on the
expansion tank. The check should be made with particular thoroughness when the engine is new or the
cooling system has been drained.
Do not remove the filler cap other than for topping-up with coolant. Frequent removal may prevent
coolant circulation between the engine and the expansion tank during engine warming up and cooling.
Top up with coolant
Top up with coolant by filling the expansion tank when level is at the "Min" mark. Use a mixture of 50
percent anti-freeze/summer coolant and 50 percent water all the year round. Top up to the "Max" mark.
If the engine is warm, and you are going to top up coolant, unscrew the cap slowly in order to allow any
file:///K|/ownersdocs/1976/1976_262_264_265/76262264265_03b.htm (5 of 14)12/22/2006 9:24:48 PM