manualshive.com logo in svg

Volvo Penta TAD1242GE, Техническое описание

Поделиться
Скачать
Volvo Penta TAD1242GE Скачать руководство пользователя страница 36

45

Group 23 EDC III

        Diagnostic function

187 Code -

Cause:

 Memory error in the engine control module

(EMS).

Response:

 Engine will not start.

Corrective action:

•

Replace the engine control unit (ECU).

188 Code -

Cause:

 Programming plug (EOL). Short to positive (+).

Response:

 Engine will not start; engine control unit

(ECU) is in programming mode.

Corrective action:

•

Check that the EOL contact is not strapped.

•

Check that the wiring to the EOL contact is not
damaged.

189 Code -

Cause:

 Programming plug (EOL). Short to negative (-).

Response:

 None.

Corrective action:

•

Check that the wiring to the EOL contact is not
damaged.

192 Code -

Cause:

 Coolant level monitor. Short to positive (+).

Response:

 None.

Corrective action:

•

Check that the wiring to the coolant level monitor
is not damaged.

•

Check that the coolant level monitor is fitted cor-
rectly.

231 Code -

Cause:

 Input for preheating request. Short to negative (-).

Response:

 Pre-heating can not be activated.

Corrective action:

•

Check that the wiring and the connection to the
preheating switch are not damaged.

233 Code -

Cause:

 Datalink error (J1708), CIU.

Response:

 Diagnostic codes from the engine cannot

be read from the diagnostic lamp.

Corrective action:

•

Check that the 8-pin connector is not damaged.

•

Check that the wiring between the CIU and the
engine control unit (ECU) is not damaged.

•

Check pin/sleeve 22 and 37 in the connector on
the CIU.

•

Check the contact pressure in sleeves 25 and 26
in the red cable glove of the engine control unit
(ECU).

IMPORTANT!

 If error numbers 115, 125 and

135 are active simulatneously, check the con-
tact pressure in sleeve 12 in the black cable
glove of the engine control unit (ECU).

IMPORTANT!

 If error numbers 145, 155 and

165 are active simulateously, check the contact
pressure in sleeve 24 in the black cable glove of
the engine control unit (ECU).

Содержание TAD1242GE






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды