Volvo Penta TAD1240GE, Руководство оператора

Страница: 23 / 76

Starting the engine
21
Volvo Penta start lock:
1. Turn the key to the ” I ” position and check the
indicator lamps.
2. Position” II ”. Pre-heating is activated (pre-heating
is an option). Wait until the pre-heating indicator
lamp goes out. Pre-heating time is dependent
upon engine temperature.
3. Start the engine with position “ III ”. Let the key re-
turn to position ” I ” immediately once the engine
has started.
NOTE! The engine has a built-in starter motor inter-
lock to prevent inadvertent activation of the starter
motor while the engine is running. The key must be
turned to the “
O ” position before attempting to start
again.
Let the engine run at 500–700 rpm for the first 10 se-
conds. Following this, warm up the engine using low
rpm and low loading.
IMPORTANT! Never rev-up the engine when it is
cold.
Alternative pre-heating:
1. Turn the key to the ” I ” position and check the
indicator lamps. Pre-heating activates
automatically (pre-heating is an option). Pre-
heating time is dependent upon engine tempera-
ture.
2. Start the engine with position ” III ”. Let the key re-
turn to position ” I ” immediately once the engine
has started.