Engine Shutdown
Allow the engine to run at low idle, in neutral, for a few minutes after operations are completed. In this way after-
boiling is avoided at the same time as temperature equalization takes place. This is especially important when
the engine has been run at high rpm or under heavy load.
Stop the Engine
IMPORTANT!
Never disconnect the current with the main switches
when the engine is running. The alternator and elec-
tronics could be damaged.
Stopping with the e-Key panel
1 Disengage the drive/reverse gear by putting the
control lever in neutral.
2 Stop the engine(s) by pushing the START/STOP
button(s).
Stopping with the start/stop panel
1 Disengage the drive/reverse gear by putting the
control lever in neutral.
2 Push the stop button(s). Release the button(s)
when the engine(s) has/have stopped.
Turning the ignition off and locking the
EVC system
To turn the ignition of, press the IGNITION button.
The green lamp in the IGNITION button goes out to
indicate the ignition is off.
To lock the EVC system, hold the key fob in front of the
symbol on the e-Key panel.
A flashing red light indicates the system is locked.
IGNITION
IGNITION
START/STOP
START/STOP
P0016518
P0013099
47705992 05-2015 © AB VOLVO PENTA
59
Содержание D3
Страница 1: ...OPERATOR S MANUAL D3 ...
Страница 140: ...Trim Controls 33 Trim Instruments 34 Trim Ranges 32 V Vacuum Valve Cleaning 97 Viscosity 131 W Water Quality 132 138 ...
Страница 141: ... 2015 AB VOLVO PENTA Volvo reserves the right to make changes Printed on environmentally friendly paper ...
Страница 142: ...47705992 English 05 2015 ...