Volvo Penta D3-110i-A, Руководство оператора

Страница: 58 / 100

56
Maintenance: Lubrication system
Oil level. Checking and topping up
The oil level should be within the marked area on the
dipstick and should be checked every day before the
first time the engine is started.
Topping up is done on the top of the engine. Top up oil
slowly. Wait a few minutes before checking the oil level
again to give the oil time to run down to the oil pan.
Then check the level again. Use only the recommend-
ed grades of oil, please refer to previous page.
IMPORTANT! Do not fill the oil above the MAX
level.
Oil filter. Changing
The oil filter is pro-environmental.
NOTE! Change the oil filter at each oil change.
WARNING! Hot oil and hot surfaces can cause
burns.
1. Put a suitable vessel underneath the filters to avoid
oil spillage.
2. Unscrew the lid on the oil filter.
3. Wait a few minutes to let the filter drain.
4. Replace the filter insert (1).
5. Place a new o-ring (2) and hand tighten the lid, use
a fixed key size 36.
7. Start the engine (low idle) and check that no leak-
age occurs. Check the oil level once the engine
has stopped.
1
2