VOLUMIC STREAM MK3 Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 70

background image

User Manual

Stream MK3/SC2/SH65 series

VOLUMIC • 12bis Rue Louis GARNERAY 06300 NICE • Tel: +33 (0)9 500 27 400 • Email: [email protected] • Web:www.volumic3d.com

page |18|

PRINTING IN STAND-ALONE MODE (SD card)

Printing in stand-alone mode, i.e. via your printer's internal SD card reader (without connecting to your computer) is
recommended.

Computers often have a tendency to restart for various reasons and/or cut and suspend USB ports, which leads
to a stoppage of printing and loss of work already done (printing cannot be resumed). In order to have a stable
and safe printing, we recommend the stand-alone mode by SD card.

We recommend that you prepare your print using your slicing software and save the file (.gcode) on your computer, then
copy it to the SD card which will allow you to start printing directly from the screen your printer once the card is inserted
into it. (If your computer is not equipped with an SD card reader, use the one supplied with the printer or transfer the file
by network if your printer is connected by Ethernet). Plus, standalone mode will give you a lot more information and
functionality than printing via USB.

IMPORTANT NOTE: Do not use a MicroSD card with an SD adapter, these
adapters tend to make false contacts very quickly and may cause your prints to
fail. Only use native SD cards without an adapter.

SD CARD FORMAT

The SD card supplied with your printer is preformatted for proper operation. If you need to reformat it or change the SD
card, make sure of the following points:

•

The SD card must be a maximum of 32GB, SD or SDHC type, SDXC are not compatible. The ideal format is a 16GB class
10 card.

•

The card must be formatted in FAT32 with allocation units (sectors) of 4096 bytes (see photos below). This is very
important to maintain good reading stability on the card. If you encounter regular file reading errors during
printing, check the format of the card as indicated above, and do not hesitate to change it with a new one.

•

Do not use a MicroSD to SD adapter, these can generate a lot of false contact due to machine vibrations and cause
your prints to fail.

«
...
17
18
19
20
21
...
»

Содержание STREAM MK3 Series







































































Отзывы:

Нет отзывов

Похожие инструкции для STREAM MK3 Series

Power Defense PD3

Бренд: Eaton Страницы: 4

Бренд: Canon Страницы: 542

mobile pro advance

Бренд: AM TECH Страницы: 16

Бренд: Citizen Страницы: 46

VarioPrint 4110

Бренд: Oce Страницы: 216

5550N - Phaser B/W Laser Printer

Бренд: Xerox Страницы: 16

Бренд: Axiohm Страницы: 6

Бренд: POSBank Страницы: 9

Бренд: Subli-Trans Xpres Страницы: 16

Бренд: Brother Страницы: 93

Бренд: Rego Страницы: 28

Бренд: Raise3D Страницы: 80

Бренд: Jay Страницы: 2

Бренд: Lexmark Страницы: 127

Бренд: TROY Group Страницы: 2

Бренд: Star Micronics Страницы: 182

Бренд: Star Micronics Страницы: 182

Бренд: 3DP Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды