5.2 Output and Overload Indicators
he green output indicator light will remain ON during normal operating
d
rrent to the connected appliance will be shut off. Correct the
verload condition and press the overload reset switch on the panel to restore
AC power.
Check the engine oil level if the red low oil indicator comes ON.
T
conditions. If the generator is overloaded or if there is a short in the connecte
appliance the output indicator will go OFF and the overload indicator will go
ON and cu
o
NOTICE
■
Before connecting an appliance to the generator, check that it is in good
order and that its electrical rating does not exceed that of the generator.
Then connect the power cord of the applianc
art the engine.
e and st
NOTICE
■
When an electric motor is started, both the overload indicator light and the
output indicator light may go on simultaneously. This is normal if the overload
indicator light goes off after about four seconds. If the overload indicator light
tays on, consult your dealer.
s
- 22 -
