98-100 ISSUE 8
21
U
SING THE
DC1000
WITH A
V
OLTECH
AT3600
OR
AT
I
(
AND
O
PTIONAL
PC)
Fig. 9
Connect the
Auxiliary
port on your Voltech AT
i
or AT3600 to the
RS232 IN
port
on your DC1000 using the 9-way male to 9-way female straight-through RS232 cable
that was provided with your DC1000.
NOTE
: See the RS232 communications section for information on USB to RS232
converters.
If you wish to use a PC to control your AT36 when you have a DC1000 hooked up to
the auxiliary port, attach the PC’s RS232 connector to the DC1000’s RS232 OUT port
using the 9-way male to 9-way male straight-through RS232 cable that was provided
with your AT product. This setup will work with any communications software you
use (e.g. Voltech AT Editor Software, or Voltech DC1000 PC Software).
