VOLTDRIVE s.r.o.,
Háj 365 (MICOS TELCOM premises), 798 12 Kralice na Hané, Czech Republic
Tel.: +420 582 307 603, Fax: +420 582 307 688
e-mail: [email protected], www.voltdrive.com
5
> Slave 5, master input 2 controls : direct and normal
> Slave 6, master input 1 controls : direct and normal
> Slave 6, master input 2 controls : direct and normal
> Slave 7, master input 1 controls : direct and normal
> Slave 7, master input 2 controls : direct and normal
> Slave 8, master input 1 controls : direct and normal
> Slave 8, master input 2 controls : direct and normal
> Slave 9, master input 1 controls : direct and normal
> Slave 9, master input 2 controls : direct and normal
> Slave 10, master input 1 controls : direct and normal
> Slave 10, master input 2 controls : direct and normal
> Slave 11, master input 1 controls : direct and normal
> Slave 11, master input 2 controls : direct and normal
> Slave 12, master input 1 controls : direct and normal
> Slave 12, master input 2 controls : direct and normal
> Slave 13, master input 1 controls : direct and normal
> Slave 13, master input 2 controls : direct and normal
> Slave 14, master input 1 controls : direct and normal
> Slave 14, master input 2 controls : direct and normal
> Slave 15, master input 1 controls : direct and normal
> Slave 15, master input 2 controls : direct and normal
----- DIO Terminal -----
[1] List digital inputs
[2] Slave settings list
[3] Change slave setting
[4] Save settings
Selection :
Option: [3] Change slave setting
This item in the menu enables setting the properties of logical 0 and logical 1 interpretation on the DIG_IN input and the
way it is transferred to the output. Once the option “Change slave setting” is selected, you must enter the number of
the slave device for which the setting is to be changed, i.e. in the following list, it is the line “Enter slave (e = exit):” with
entered option 0 and then you are asked to select Input 1 or 2. The list is displayed as follows:
Selection :3
Enter slave (e = exit) :˙0
> Slave 0. Select input:
[1] Input 1
[2] Input 2
[e] Exit
Selection :
Once you select the channel for which you want to change the setting, the first part lists the device and the input you
change the setting on, see:
> Slave 0, master input 2
Next the current setting of both inputs is listed, see:
> Slave 0, master input 1 controls : disabled and normal
> Slave 0, master input 2 controls : both and normal
The list for both channels is displayed because the setting of one channel can affect the setting of the other channel.
The final list of the setting options for a particular input is displayed as follows:
Selection :2
> Slave 0, master input 2
> Slave 0, master input 1 controls : disabled and normal
> Slave 0, master input 2 controls : both and normal
[0] None/disabled
[1] Direct output
[2] Opposite output
[3] Both outputs
[4] Normal
[5] Reversed
[e] Exit
Selection :
