VOLTCRAFT V-CHARGE 100 DUO, Руководство по эксплуатации

Страница: 90 / 236

90
NiMH 1.2A 7.63V
CHG 022:43 00682
BATTERY CHECK
................
For example, conventional NiMH-mignon/AA-cells with a capacity of 2000 mAh permit
a charging current of 1C (this corresponds to a charging current of 2 A). For quick
charging of such cells (contained, e.g., in receiver batteries), never set more than
0.5C.
Charge a NiMH or NiCd battery as follows:
• Fist, choose the rechargeable battery type with the button "INC" or "DEC" as described in
chapter 12. a) (NiMH or NiCd) and push the button "START/ENTER".
• Select the rechargeable battery programme "CHARGE"
with the button "INC" or "DEC".
The value at the lower right represents the currently set
charging current.
Use the button "INC" or "DEC" to select a different rechargeable battery programme;
use the button "BATT. TYPE/STOP" to return to the main menu.
• If the value for the charging current must be changed, push the "START/ENTER" button. The
charging current flashes. Change the charging current using the button "INC" or "DEC". Keep
the respective button pressed for quick adjustment.
The maximum possible charging current depends on the battery type and number of
cells. The max. charging capacity for output #1 is 100 W; 50 W are available for output
#2. The combined charging capacity (output #1 + #2) is max. 100 W.
Confirm the set charging current with the "START/ENTER" button.
• When no display is flashing anymore, start charging by keeping the "START/ENTER" button
pushed (approx. 3 seconds).
• The charger now examines the connected recharge -
able battery. In case of an error, a warning signal is
output and the corresponding information is displayed.
You can stop the warning signal by pressing the "BATT.
TYPE/STOP" button. You then return to the previous
configuration menu.
If no error is found, e.g. the display shown on the right
will appear.
The rechargeable battery type is shown in the upper left ("NiMH" = NiMH rechargeable bat-
tery), the upper middle shows the charging current and the upper right the current recharge-
able battery voltage.
The lower left shows the current rechargeable battery programme ("CHG" = "CHARGE"), in
the middle the elapsed charging time and the charged capacity in mAh are displayed to the
right of this.
NiMH CHARGE
CURRENT 2.0A