VOLTCRAFT V-CHARGE 100 DUO, Руководство по эксплуатации, Страница: 112 / 236

112
18. PC Software
First install the software (at least Windows XP or higher required) and the drivers of
the enclosed CD before connecting the charger to a computer.
For operation of the software observed, e.g., the corresponding information on the CD
or in the software's help function.
Important!
For design reasons, it is impossible to connect both USB interfaces (see chapter 8,
item 16/17) to a single computer and control them by software at the same time (no
switching option was present at the time these operating instructions were drawn up).
In this case, two separate computers are required that must be connected to one USB
interface of the charger each.
• Place the CD included in the delivery in the corresponding drive of your computer.
• Open the table of contents of the CD, e.g. with the file manager of Windows and start the
installation programme.
• Follow all instructions of the software or Windows.
• Now connect the USB socket of the charger to a free USB interface of your computer via a
suitable USB cable (not included).
Windows recognises the new hardware and completes the driver installation. Windows may
then have to be restarted.
• Start the software. If any problems occur, try starting the software with Administrator rights.
• The charger can be controlled by software now.
If a new version of the software is available, you can find it on the website
www.conrad.com,
in the download area for the product.