• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensate generated can possibly destroy the product. Allow
the product to reach room temperature before connecting it and putting it to use.
This can possibly take several hours.
• Never leave the product unattended during use.
•
The housing warms up during use. Ensure that there is sufficient ventilation. Do
not cover the housing!
• Do not expose the product to direct sunlight when the internal battery is fully
charged.
• Do not store the product in a heated vehicle. Avoid excessive heat (up to 45 °C).
Observe the “Technical data”.
• Make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Store the product in a cool, dry place when it is not in use.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
•
Maintenance, modifications and repairs must be done exclusively by a technician
or a specialist workshop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Battery
• The battery is integrated into the product and cannot be changed.
• Never damage the battery. Damage to the battery case may cause a risk of
explosion or fire! Unlike conventional batteries (e.g. AA or AAA batteries) with a
thin sheet metal case, the case of the LiPo battery is made of a sensitive plastic
film.
• Never short-circuit the contacts/connections of the battery. Do not throw the
battery or the product into fire. This may cause a risk of fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery of the product unattended when it is charging.
• Place the product on a heat-resistant surface when charging the battery. The
product may become warm when the battery is charging.
Product overview
1
3
2
5
9
8
7
4
6
1 Battery level indicator
2 Function switch
3 Eyelet for carabiner hook
4 Solar panel
5 Solar charging lamp
6 Micro USB input
7 USB-C
TM
input/output
8 LED torch
9 USB-A output
Charging the internal battery
Fully charge the internal battery before first use.
Never charge the internal battery while an external mobile device is being charged.
Before charging, ensure that the USB power source can deliver a sufficient charging
current, otherwise you may damage the product.
Do not use a USB port on a computer, keyboard or USB hub without its own power
adapter to charge the internal battery as the current supplied by these items is not
sufficient.
When charging the product via USB, make sure that the solar panel is not exposed
to sunlight. Otherwise, the internal battery may overheat.
Ensure that the connected devices’ specifications conform to the product’s
specifications listed in the technical data.
Do not short-circuit the USB inputs/outputs.
Briefly press the function switch
(2)
to display the internal battery charge level. The remaining
capacity of the battery is indicated by the lit LEDs as follows:
1 LED:
Remaining capacity up to 25 %
2 LEDs: Remaining capacity up to 50 %
3 LEDs: Remaining capacity up to 75 %
4 LEDs: Remaining capacity up to 100 %
Operating instructions
Solar power bank SL-10C
Item No. 1678279
Intended use
The product is intended for use as a mobile spare battery and is suitable for charging a battery
of mobile devices (e.g. tablet PC, smartphone, MP3 player, digital camera, etc.). The internal,
integrated battery is charged via USB or via the solar panel. The product is equipped with a
robust housing and has a battery level indicator and an LED torch.
With correctly sealed covers, the product is protected against dust and water jet according to
IP66.
For safety and licensing reasons, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
operating instructions carefully and store them in a safe place. Only make this product available
to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Solar power bank
• USB power cable (approx. 30 cm)
• Snap hook
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions that must be observed
The arrow symbol indicates special information and advice on how to use the
product.
Safety instructions
Read the operating instructions carefully and observe safety instructions. If
you do not follow the safety instructions and information on proper handling
in these operating instructions, we will assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous toy for children.
•
Protect the product from extreme temperatures, strong impacts, flammable gases,
vapours and solvents.
• The product is waterproof according to IP66 only when all covers are correctly
closed.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe safety and operating instructions of any other devices which are
connected to the product.
• Attention, LED light:
- Do not look directly at the LED light!
- Do not look into the beam directly or with optical instruments!