51
8. INSERTING/REPLACING BATTERY
• First terminate all measuring processes and remove the measuring cables from the
current injection probe.
• Switch off the current injection probe.
• Remove the cover for the battery compartment at the rear of the current injection probe
by turning out the attachment screw (see arrow in the figure above) with a small Phillips
screwdriver.
• Remove the discharged battery from the battery compartment.
• Connect a new battery to the battery clips. The special build of battery clips and 9 V-
block protects the connection against polarity reversal.
• Insert the battery into the battery compartment.
• Insert the battery compartment lid again. Ensure that the battery cable is not crushed.
• Last, carefully tighten the attachment screw. Do not use any force for this.