21.
1. Connect the charger to an electrical oulet. ‘Power’ light will
turn on.
2. Make sure the ignition key is removed and only then connect
the charger to the
VOLTBIKE
. ‘Charging’ light will turn red.
3. Charge for 6 hours until the ‘Charging’ light turns green.
4. When the ‘Charging’ light turns green, detach the charger from
the outlet.
5. Detach the charger from the
VOLTBIKE
.
2.8.4 REGULAR CHARGE
To perform a regular charge, you must either:
1. Remove the battery from its designated place in your
VOLTBIKE
and charge it by connecting it directly to the charger.
2. Connect the charger directly to the outlet on your
VOLTBIKE
,
which is located just beneath the seat.
Charge your battery after every use as per the procedure outlined
above and do not allow it to fully discharge, as this may permanently
damage the battery). Avoid frequently removing the battery for charg-
ing, as unnecessary movement may damage the electrical connections
or agitate the chemicals inside.
2.9 LIGHTING
Your
VOLTBIKE
is equipped with front and rear lights in order to
ensure your visibility to other vehicles on the road. Every time you
signal or brake, an appropriate light turns on or begins to blink. When
signalling right or left, an orange light will begin to blink of the
appropriate side of your
VOLTBIKE
. A sound will also be emitted in
order to keep you informed. When braking, a red light will go off on
the back of the bicycle. Headlights must be turned on, either low or
high-beam mode, when poor lighting conditions may hinder your
visibility.
Содержание metro
