-Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and
enables better control of the chainsaw in unexpected situations.
-Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and
chains may cause chain breakage and/or kickback.
-Follow the manufacturer’s sharpening and maintenance instructions for the chainsaw. Decreasing the depth
gauge height can lead to increased kickback.
● It is recommended that the user is instructed by a qualified specialist with regard to the operation of the
chainsaw and the use of safety equipment based on practical examples prior to first commissioning.
● This product is not intended to be used by persons (including children)or who are limited in their physical,
sensory, or mental capacities, or who lack experience and/or knowledge of the product.
● Children should be supervised to ensure that they do not use this product as a toy.
● Children and adolescents are not allowed to operate this chainsaw. The same applies to persons who are
not or not well enough acquainted with the chainsaw.
● The operating instructions should always be within easy reach.
● Persons suffering from fatigue or who are not physically fit must not operate the chainsaw.
● Keep the handles dry and free from grease. Slippery handles can cause accidents.
● Keep a firm hold of the electrical tool with both hands while working and make sure you are standing firmly.
The electrical tool is safest when using two hands.
● Do not leave tools, objects, or cabling laying around in the vicinity of the device. If you stumble, you may
injure yourself on the power tool.
● Make sure that all safety facilities and handles are mounted when using the product.
● Never attempt to operate an incompletely mounted product or a product with third-party modifications.
● Wait until the electrical tool has come to a standstill before setting it down.
● Do not use any accessory that has not been provided and recommended by the manufacturer specially for
this electrical tool. Just because the accessories can be fixed on your electrical tool does not mean that they
are secured or safe to use.
● Remember that moving parts may also be located behind ventilation and venting slots.
● The fuse must be a residual current circuit breaker with a measured residual current of no more than 30 mA.
● Lay out cabling such that it cannot become caught in branches or similar during sawing.
● Never work without the bump stop. Never remove the bump stop.
● Beginners should practice cutting round wood logs positioned on a saw block or on a frame.
● Symbols appearing on your product may not be removed or covered. Information on the product that are no
longer legible must be replaced immediately.
GENERAL SAFETY INSTRUCTIONS
06
Additional Safety Information
GENERAL SAFETY INSTRUCTIONS
06
Be careful when handling this device! Observe all safety instructions in the manual for use.
Read and observe operating instructions before commissioning.
Do not expose this machine to moisture.
Area with danger of kickback.
