Dusting Brush
Furniture, drapes, blinds, bookshelves,
lampshades and vents.
Unibar
vac edge UR
1) Remove hose from hose retainer
from back of vacuum.
2) Place dusting brush on end of hose,
wand or crevice tool.
Turbo Brush and Stair Hose
Furniture and stairs. Some vacuum models have an additional stair hose – Part number 70947-5.
Stair Hose, Hard Floor Nozzle, and additional wands
(On Some Models - Contact Customer Service to order)
An additional Stair Hose, Hard Floor Nozzle and additional tubes can be purchased. When attached to the hose
on the cleaner you can clean a full flight of stairs without moving the cleaner. An additional set of tubes and hard
floor nozzle can be purchased. When attached to the hose on the cleaner you can clean hard floors. Contact
our Customer Care representatives.
Make sure vacuum is below you,
pushed against the bottom step.
1) If model has additional stair hose,
attach to end of hose.
2) Attach Turbo Brush to the end
of wand and hose.
Vacuum must be turned off before
removing debris from Turbo Brush.
Combination Crevice Tool and Extension Wand
Baseboards, corners & between cushions
1) Grasp crevice tool near ridges and
pull apart.
2) Turn ridge end to center.
3) Push crevice tool into wand and
place on end of hose.
Vacuum Cleaner handle must be in upright position.
Be sure to raise height adjustment setting before using attachments.
Replace hose into hose retainer after using accessories.
Do not allow cleaner to tilt forward when using accessories. Do not place cleaner on
furniture or stairs for any period of time as the brush roll may cause damage.
!
!
!
How to Use Accessories
When cleaning stairs, do not place the cleaner on the stairs or on a stair above you. This unit
is fitted with a constantly rotating brush roll. Care should be taken when using the hose to
clean stairs that the back - not the front of the unit is placed against the base of the stairs. This
will prevent the unit leaning forward and causing possible damage to carpets or floors.
3
