VOLT
®
Floodlights
VFLE 120V Series
INSTALLATION & MAINTENANCE GUIDE
w w w . v o l t l i g h t i n g . c o m
–2–
Important: Please Read Before Installation
IMPORTANT SAFETY INSTRUCTIONS
1. This LED Floodlight uses the latest in solid state lighting technology for long
life, low maintenance, and high efficiency.
2. The same as traditional HID lighting. There are two installation methods,
suitable for various occasion.
3. An internal power-factor-corrected switch-mode supply allows it to be used
from any nominal 100V-277V, 60Hz AC supply without any variation in light
output.
4. Suitable for use in the following locations:
a. Ambient Temp: -20~+40°C (-4~+104°F)
b. Wet Locations
Note: Save these instructions for future reference.
To avoid the risk of fire, explosion, or electric shock, this product should be
installed, inspected, and maintained by a qualified electrician only, in accordance
with all applicable electrical codes.
To avoid electric shock:
1. Be certain electrical power is OFF before and during installation and
maintenance.
2. Luminaire must be connected to a wiring system with an equipment-grounding
conductor.
To avoid explosion:
1. Make sure the supply voltage is the same as the rated luminaire voltage.
2.
Do not install where the marked operating temperatures exceed the ignition
temperature of the hazardous atmosphere.
3. Do not operate in ambient temperatures above those indicated on the
luminaire nameplate.
For supply connections use wire rated for at least 90°C (194°F)
Warning: the luminaire shall be installed by qualified electrician.
!
!
