INSTALLATION INSTRUCTIONS
- 4 -
Marking for Expansion Bolt Anchors
1
Install Expansion Bolt Anchors
2
VOLT
®
12V RGBW Flood Light
VFL-450X-ABZ
Mark two points on the mounting
surface using the holes on the yoke
mount as a guide. These marks will be
used for the expansion bolt anchors (not
included).
Mounting
Surface
Hole
Fixture
Body
Yoke
Mount
Expansion Bolt Anchors
(not included)
Drill the proper holes using the
marks on the mounting surface for
the expansion bolt anchors. Insert
the expansion bolt anchors into the
drilled holes. Tighten the hex nuts on
the expansion bolt anchors until they
are fastened to the surface.
Mark
Mounting
Surface
Install Fixture Body
3
Remove the hex nuts and washers
from the expansion bolts. Attach
the yoke mount with fixture body
to the bolts and secure with the
previously removed washers and
hex nuts. Tighten until snug.
Fixture Body
Bolt
Hex Nut
Washer
Mounting
Surface
Yoke
Mount
Содержание VFL-450X-ABZ
Страница 11: ...11...