[email protected] • 813.978.370
0
Install Face Cover
4
Fixture Body
- 5 -
Face Cover
Wire Connections
5
Fixture
Wire
Connectors
Main Supply Cable
Pigtail
Install/Replace Lamp
Rotate the face cover and remove it to expose the lamp. Replace it with the
correct wattage and type marked on the fixture label. Then, reinstall the
face cover.
IMPORTANT: Halogen bulbs must be protected from moisture and dust at all
times. Always reinstall the face cover when removed.
Push face cover back onto the
fixture body aligned with the gaps
in the fixture body. Once the face
cover is flush with the fixture body,
rotate the face cover until it stops
and locks into place.
Strip both leads from luminaire
pigtail. Using two wire connectors
(sold separately), connect leads
from luminaire to main supply cable
leads.
