w w w . v o l t l i g h t i n g . c o m
INSTALLATION INSTRUCTIONS
Remove Face Cover
1
Face Cover
Fixture Body
Rotate
Install Lamp
3
Insert lamp with the correct
wattage and type marked on
fixture label and push into place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
Lamp
Socket
- 4 -
Install Fixture Body
2
Fixture Body
Lock Screw
Wall Anchor
(optional)
Hole
VOLT
®
Florentine Deck Light
VDL-6008-4-BBZ
Rotate the face cover until it
stops and then lift the cover
straight off.
Note: The first time it may be
difficult because the fixture
has a very tight o-ring seal and
a grease sealant for moisture
protection.
Attach the fixture body to your
desired location and secure with lock
screws.
Note: Wall anchors may be required
for certain installation conditions
(e.g. Brick walls, Concrete Walls,
etc.). Mark on the wall using holes
on the fixture body to drill holes for
your wall anchors. Remove base and
drill proper holes in the wall, then
insert wall anchors.
