w w w . v o l t l i g h t i n g . c o m
Rotate the cover clockwise
until it is stops and then lift
the cover straight off.
Note: The first time it may be
difficult because the fixture
has a very tight o-ring seal and
a grease sealant for moisture
protection.
Separate Cover and Backplate
1
Fixture
Backplate
Cover
Backplate
Lock Screw (not
included)
Wall Anchor
Hold the base in the correct
direction as indicated by the
arrow on it. Attach the base onto
the desired location and secure
with the lock screws.
Note: Wall anchors are required
for certain installation conditions
(brick walls, concrete walls, etc.)
Use the holes in the base to mark
where to put the holes in the
wall. Remove the base and drill
the proper holes in the wall, then
insert the wall anchors.
Install Backplate
2
VOLT
®
Up/ Down Integrated LED Deck Light
VDL-6007
INSTALLATION INSTRUCTIONS
