INSTALLATION INSTRUCTIONS
w w w . v o l t l i g h t i n g . c o m
- 4 -
Wire Connection
3
Pass main supply cable and next fixture cable through the center hole
on the backplate.
Strip the end of main supply cable pigtail. Insert one pigtail into one
terminal block in the hub and insert another pigtail into another
terminal block in the hub.
Use the same method to connect supply cables from fixtures. Be sure
to insert same color pigtails to the same terminal block.
Next Fixture
Cable
Main Supply Cable
Backplate
Install Fixture to Hub
2
1
2
Pass fixture cable through the
waterproof washer and the
center hole on the hub in turn.
Place the waterproof washer
around the screw of the fixture
and then thread the screw onto
the hub. Hand tighten until
snug.
Fixture
Fixture Cable
Waterproof
Washer
Hub
Hub
Terminal Block
Terminal Block
VOLT
®
Connection Hub
VAC-ZWM8-BBZ