![background image](http://html.mh-extra.com/html/volt/vac-hs-6718-ymp/vac-hs-6718-ymp_installation-instructions-manual_1046273004.webp)
w w w . v o l t l i g h t i n g . c o m
INSTALLATION INSTRUCTIONS
- 4 -
VOLT
®
18” Hardscape Mounting Bracket (Stainless Steel)
VAC-HS-6718-YMP
Install Stake
3
Determine the desired location
for mounting the stake. Hammer
the stake into the ground until
flange of stake is flush to grade.
To avoid damage to the stake,
place a board on top of the stake
while hammering.
Note: If the ground is hard and
the stake is difficult to install,
make a crosscut in the ground
using a flat shovel.
Board
Ground
Soil
Stake
Intsall Riser to Stake
4
Supply Wire
Clear away area in the ground
at wireway slot on the top of
the stake. Pass the fixture supply
wire through the center hole of the
stake and lay it into
the wireway slots. Thread the
riser onto the stake. Hand
tighten until snug.
Riser
Ground
Soil
Stake