![background image](http://html.mh-extra.com/html/volt/vac-hs-6718-ymp/vac-hs-6718-ymp_installation-instructions-manual_1046273003.webp)
[email protected] • 813.978.3700
- 3 -
Optional: Install Glare Guard Before Installation
If you choose, you can attach the
glare guard first before mounting
the fixture.
Use the screws and washers to
secure the glare guard onto the
fixture. Tighten with a
screwdriver.
Screw
Washer
Install Luminaire to Y Bracket
Determine Luminaire Location
1
Place the luminaire onto the
Y bracket using the rubber
washers and screws. Tighten
with a screwdriver.
Y Bracket
Luminaire
Screw
Rubber Washer
Install Riser
2
Luminaire
Pass the supply wire from the
luminaire through the center
hole on the Y bracket and the
riser. Then thread the riser
onto the Y bracket and hand
tighten until snug.
Supply Wire
Supply Wire
Riser
Y Bracket