![background image](http://html.mh-extra.com/html/volt/sedona-vht-306-11-bbz/sedona-vht-306-11-bbz_installation-instructions-manual_1046269007.webp)
[email protected] • 813.978.3700
Wire Connection
10
Install/Replace Lamp
- 7 -
Install Stem to Stake
9
Clear away an area in the
ground at the wireway slot
on top of the stake. Lay the
luminaire pigtail into the
wireway slot and secure the
stem onto the stake. Tighten
until snug.
Stem
Stake
Pigtail
Wireway Slot
Strip both leads from the luminaire. Using two wire
connectors (sold separately), connect the leads from the
fixture to the main supply cable leads.
Pigtail
Main Supply Cable
Wire Connectors
Remove the hat and stem top to expose the lamp and replace it
with the correct wattage and type marked on the fixture label. Then,
reinstall the stem top and hat.
IMPORTANT: Lamps must be protected from moisture and dust at all
times. Always reinstall the stem top and hat when removed.