18
6.
Operation
Incorrect handling or installation of the unit may result in severe
personal injury as well as damage to the charging device. In particular,
handling with voltages applied may result in electric shock, which may
cause death or serious injury to personnel. Defective installation or
maintenance may also lead to the risk of fire.
Read the manual carefully before connecting the charging device.
Follow all installation, operation and maintenance instructions
throughout the
device’s
functional life. Pay special attention to the
compliance with all installation and operation standards of the
National Electrical Code.
6.1.
How to Connect?
Once the installation and verification procedures are been properly carried out according
to Section 4
–
Installation, the charging device is ready to be used.
Connect the cable
✓
Connect a qualified and compatible charging cable to your EV and plug the
appropriate terminal to the home charger. Make sure that both the terminals
are securely attached.
Unplug the cable
✓
Once the charging circle is terminated, unplug the cable from the home charger
and your EV and stall it properly.
6.2.
How to Charge?
Once a qualified and compatible charging cable is securely connected to both your EV
and the home charger, the charging program is ready to be initiated.
Switch on the charger
To switch on the charging device, please carry out the following steps:
✓
Switch on the MCB and RCD installed on the distribution board;
✓
Once the power supply is switched on, the left indicator will present white
light and the following default screenshots will appear on the touch screen:
