11
4.2.
Mounting the charging device
Use the supplied wall fixing materials (wall plugs and screws) to fix the charger to the
wall. make sure that the installation surface is flat. The charging station must be prepared
for this before mounting. To do this, proceed as follows:
➢
Attention: The fastening materials equipped may vary depending on the
types of wall surfaces. The use of appropriate fixing devices ensures the
correct functioning of the equipment.
1.
After correctly adjusting the vertical position of the charger, mark 6 mounting
holes (for version 2.3 only those marked with the number 1 in the image) at the
desired location on the wall. The supplied wall mounting plate can be used as a
guide for this purpose.
1
Mounting holes
2
Manual cable lock release trigger hole
*(not available for model 2.3)
1
1
1
2
1
1
FIGURE 5 Installation template
