40
21.
Troubleshooting and repair
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Problem
Possible Reason
Corrective Action
Pruner doesn’t start
Battery out of charge
Charge Battery
Battery not connected
Connect battery
Safety switch cannot be
initiated
Open by initiating safety on
switch
On / off switch failure
Send to repair service center
Intermittent Operation
Loose internal connections
Send to repair service center
On / off switch failure
Hot Blades
Blade dull
Sharpen or replace the blade
Blade gap
Sharpen or replace the blade
Poor lubrication, resulting in
excessive friction
Lubricate blade
Poor Trimming
Performance
Lubrication is not in place,
resulting in excessive friction
Lubricate blade
Dirty blade
Clean blade
Blade dull
Sharpen or replace the blade
Trimming quality is poor
Read the instructions carefully
The battery is not fully
charged
Charge the battery
Will not charge. Charger
red light flashes.
The battery is not properly
placed in the charger
Insert the battery correctly
The battery charger is not
connected properly to the
power supply
Connect properly
Battery contact point is dirty
Clean the battery contacts
Invalid battery
Replace battery
Battery charger is invalid
Replace Battery Charger
