38
LED
Charge level
Green
100% – 60%
Orange
60% – 20%
Red
20% – 10%
Red blinking light
Less than 10%
When the green light is illuminated then your battery is suitable for operation. Depending on
operating variables such as diameter of cut, density of wood and frequency of the cuts a typical
battery charge will last 3 hours.
When the red light is blinking then you should charge the battery as soon as possible.
17.2.
Warning tone of batteries
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Beeps
Interval
Indication Description
1 time
0.1 seconds Switch on
1 long
2 short
0.3 seconds
0.1 seconds
Hold trigger 4 seconds, enter standby mode
2 times
0.1 seconds
No operation for 3 minutes, Enter standby
mode.
Note: Pruners that have cut over 100,000 times, require comprehensive inspection and
maintenance.
18.
Waste Disposal and Environmental Protection
Move battery from equipment; recycle battery, tool, accessory and package to kind of waster.
The equipment is not part of household waste.
Send the equipment to a recycling center. The metal and plastic in the equipment can be recycled after
be screened. For detailed information, please contact the Service Center.
Do not discard the battery in household waste, fire (danger of explosion) or water. In case of the
leakage of toxic gas or liquid, damaged battery may cause potential environmental and personal health
risk.
