35
9.
Part list
Open the package carefully and check whether the following parts are included:
•
Tying machine
•
N° 2 Tying wire
•
N° 2 Batteries
•
Three- way battery charger
•
Holster
•
Toolbox
•
Tweezers
•
Scissor
•
User’s Manual
•
Warranty card
10.
Charging the battery
Never expose the battery to extreme conditions such as high temperatures or shocks.
Otherwise, personal injury will be caused by the leakage of electrolytic solution.
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before first time using.
•
The battery is not fully charged when you buy, you must charge 3-4 hours before using first time.
•
Before recharging the battery, check the remaining charge on the display.
•
Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
•
Keep safety rules and environment protection information in mind all the time.
10.1
Battery charging procedure
•
Charge at temperature of
＋
10°C~
＋
22°C indoor.
•
The three-way battery charger allows you to recharge the 2 batteries supplied at the same time
•
Make sure specifications on battery and adapter matched before charging.
•
The red LED light on the charger indicates the battery is charging, the green LED light indicates it is fully
charged. The approximate charging time is 3 to 4 hours (charging time for 2 fully discharged batteries at
the same time), do not keep the batteries connected longer than necessary as they may damage them.
•
The charger has three outputs, you can charge up to 3 batteries simultaneously. The charging time
is proportional to the number of batteries connected and the state of their charge. Monitor the
charging time by the LED indicator (red light in charge, green light end of charge).
•
Disconnect the battery charger connectors from the batteries after charging is complete.
•
Make sure the battery is recharged at least every 3 months when not in use. Do not store the
machine with the battery connected.
11.
Working environment
•
Keep temperature of environment at 0°C ~ 45°C when charging battery, -10°C ~ +60°C when battery
is working.
•
Keep tool at temperature of -5°C ~ 30°C when working
