FW 1.
49
.
57
英文版
FW 1.
49
.
57
英文版
FW 1.
49
.
57
英文版
FW 1.
49
.
57
英文版
–
After update is completed, please
on the back of
press the reset button
the screen to reboot the vp16 to use the update features.
–
After the update is completed, insert the SD card back into the VP-16,
install it back in the car, and start the engine. The VP-16 will be
automatically updated.
(It will take 5 ~ 15 minutes to update, there is
no need to perform performance tune / adjustment after the update is
completed)
–Insert Micro SD Card into the included USB adapter.
–
Remove Micro SD Card from VP-16
–Insert Micro SD Card into the included USB adapter.
–
Remove Micro SD Card from VP-16
1
.
Remove Micro SD Card
2
.
The Update Process
Update Available
–
Start VLINK-16 program, then plug the SD card adapter into your PC. The
"Update Available"
will show-up automatically on the left side of the
screen. On the next page, click "Install Latest" to proceed update. Please
wait for the update process to be finished to unplug the SD card adapter.
( You don't need to re-download the settings for the vehicle). Or, you can
choose the firmware versions from the list as recommended or preferred.
★
Do Not format the SD card, otherwise the VP-16 will not work properly.
–Visit www.volochip.tw/vp-16 to download and install VLINK-16
program.
9
10
