Vollrath STOELTING Flavor Burst STL-80BLD, Руководство оператора, Страница: 57 / 76

54
Installing the Blending System and
Suspension Bracket
The suspension bracket helps stabilize the
Blending Assembly on the freezer. When
properly installed on the freezer, the bracket
should hold the Blending Assembly level
horizontally, with the Blending Head lined up
directly under the spout adapter. Two different
suspension brackets are included with this
system: one for freezer doors with four knobs /
posts, and one for freezer doors with two knobs
/ posts. Additional suspension bracket styles
may available for other freezer models through
White Glove Service.
The Blending Assembly can be mounted to
either side of the freezer spout. The 9-Tube
Assembly may also come from either side,
regardless of the Blending Assembly’s position.
Images below show installation on a 4-
knob/post freezer with multiple barrels.
RECOMMENDED POSITIONING:
(A) When possible, install the Blending
Assembly on the opposite side of the 9-
Tube Assembly’s placement.
Placing
the Drive Motor end of the assembly
opposite from the 9-Tube Assembly
makes it easier to attach and remove
the 9-Tube Assembly when cleaning.
(B) If there are vents on the side of the
freezer that blow out warm air, install the
9-Tube Assembly on the opposite side.
The air could warm the syrup and affect
the look of the soft serve product when
served. Installing the 9-Tube Assembly
on a side that does not have vents
blowing air will keep the syrup cool and
product consistent.
1. Determine how the Blending Assembly will
be positioned on the freezer. When
possible, follow the recommended position
outlined above.
2. Ensure the freezer barrel is empty before
proceeding. If the freezer has multiple
barrels, ensure all barrels are empty before
proceeding. The suspension bracket is
installed behind the freezer door.
3. Remove the door knobs from the freezer
door.
4. Remove the freezer door from the freezer.