Vollrath STOELTING CW 5 Plus - 37b, Руководство оператора, Страница: 8 / 28

Section 3:
Operation
OPERATOR’S MANUAL
8
OPERA
TION
Having pressed the PROGRAMMING / ADJU button , the P3 code flashes on the digital
display.
Setting the continuous dispensing (Co). Maintain the dispensing active until the washing solution
mix contained in the cream container is used up.
DO NOT RUN THE PUMP WITHOUT SOLUTION IN ORDER TO AVOID DAMAGING IT
NOTE: ROTATE THE AIR REGULATOR KNOB
TO POSITION BETWEEN 1 - 2
-(D1) Pour drinking water at room temperature into the
cream container up to half of its capacity, to wash all
residues of cream.
-(D2) Place a suitable container under the dispensing
faucet.
-(D3) Press the “DISPENSING” button to drain the
rinsing water in the cream container into the appro-
priate container placed under the dispensing faucet .
-(D4) Press the “DISPENSING” button again to stop
the continuous functioning when the cream container
is empty.
-(D5) Remove the cream container and wash it in
a solution of 1 gallon of water at 104 °F and 2 oz
of detergent (according to detergent instructions).
Rinse the cream container with room temperature
water until it’s clean of detergent and place it in the
refrigeration tank.
-(D6) Pour inside the cream container a solution com-
posed of 2 quarts of warm water at 104 °F and 1 oz
of detergent (according to detergent instructions).
-(D7) Place a suitable container under the dispensing
faucet .
-(D8) Press the “DISPENSING” button to drain the
water and detergent in the cream container into the
appropriate container placed under the dispensing
faucet .
D Rinsing Phase and Washing procedure:
D2-D3 D2-D3
D4 D4
D1 D1
D7-D8 D7-D8
D6 D6
D5 D5
D5 D5
D5 D5