
Section 3 :
Operation
OPERATOR’S MANUAL
OPERATOR’S MANUAL
11
OPERA
TION
-
(G1) Place all parts in 90° to 110°F (32°C to 43°C) solu-
tion composed by 2 gallons of warm water and 2 oz of
detergent (according to detergent instructions). Use the
brushes that shipped with the machine to clean all holes
of the the removed parts (air-valve, labyrinth, labyrinth-tu-
be, air regulator body, valve socket, etc.).
-
(G2) Rinse all parts with clean water at 90° to 110°F
(32°C to 43°C) .
Disassembling valve assembly, removing of the O-Ring gaskets of the labyrinth and of the valve assembly.
-(F5) Remove the gaskets on the labyrinth, using a
non-metallic pointy tool, taking care of not damaging
the gaskets’ seatings.
-(F6) Take out the regulating valve from the valve
socket.
-(F7) Remove the gasket from the valve, using a
non-metallic pointy tool, taking care of not damaging
the gasket seating.
-(F8) Remove the gasket from the valve socket,
using a non-metallic pointy tool, taking care of not
damaging the gasket seating.
F
Disassembling Secondary Parts:
F5
F5
F5
F5
F5
F5
F7
F7
F8
F8
G
Cleaning and Sanitizing Disassembled Parts:
Disassembled parts require complete cleaning, sanitizing and air drying before assembling. Local
and state health codes will dictate the procedure required. Some state health codes require a four
sink process (pre-wash, wash, rinse, sanitize, air dry), while others require a three sink process (wi-
thout the pre wash step). The following procedures are a general guideline only. Consult your local
and state health codes for the procedures required in your location.
Be sure to use the brushes that shipped with the machine
to properly clean the parts.
-
(G3) Place all parts in the sanitizing solution (composed
by 2 gallons of warm water and 2 oz of Stera Sheen sa-
nitizer, according to STERA-SHEEN instructions) for at
least 5 minutes, then remove and let air dry completely
before assembling in the machine with sanitized gloves.
G1
G1
G2
G2
G3
G3
F6
F6
Содержание STOELTING CW 5 Plus - 37b
Страница 1: ...Operator s Manual Cream whipper model CW 5 Plus 37b Translation of the original instructions...
Страница 2: ...Section 1 Introduction OPERATOR S MANUAL 2 INTRODUCTION...
Страница 25: ...Section 5 Troubleshooting OPERATOR S MANUAL 25 TROUBLESHOOTING...
Страница 28: ...updated 04 02 2020...