background image

Operator’s Manual

High Power Countertop Induction Ranges with Temperature Control Probe

©

 2021 The Vollrath Company L.L.C. 

Part No. 351714-1  ml 6/18/2021

SAFETY PRECAUTIONS

To ensure safe operation, read the following statements and understand 
their meaning. This manual contains safety precautions which are 
explained below. Please read carefully. 

Warning is used to indicate the presence of a hazard that will or can 
cause severe personal injury or death. 

Caution is used to indicate the presence of a hazard that will or can 
cause minor or major personal injury if the caution is ignored.

NOTICE: Notice is used to note information that is important but not 

hazard-related. 

To reduce risk of injury or damage to the equipment:

• Unplug this equipment from the wall outlet when not in use.
• Use this equipment only in a flat, level position.
• To protect against electrical shock, do not immerse, the cord or plug 

in water. Keep the cord away from heated surface. Do not let the 
cord hang over the edge of table or counter.

• As a precaution, persons using a pacemaker should stand back 12" 

(30 cm) from an operating unit. Studies have shown that the 
induction element will not disrupt a pacemaker.

• Keep all credit cards, driver licenses and other items with a magnetic 

strip away from an operating unit. The unit’s magnetic field will 
damage the information on these strips. 

• The heating surface is made of a strong, non-porous material. 

However, should it crack or break, stop using and immediately 
unplug the unit. Cleaning solutions and spills could penetrate the 
broken cooktop and create a risk of electrical shock.

• Do not operate this equipment with a damaged cord or plug or if it is 

not functioning properly. 

• Do not operate unattended. Closely supervise units operating in 

public areas and/or around children.

• Do not place any objects inside the air intake or exhaust panels.
• Do not modify the equipment or a attach any accessory other than 

the included temperature control probe and USB flash drive.

TABLE OF CONTENTS

Function and Purpose  ................................................. page 1
Cookware Requirements  ............................................. page 2
Environment Requirements ......................................... page 2
Clearance Requirements  
............................................. page 2
Features and Controls  ................................................. page 3
Operation .................................................................... page 4
Edit the Default Programs  
........................................... page 7
Cleaning ...................................................................... page 8
TroubleShooting ......................................................... page 9
Fuse Instruction  .......................................................... page 11

FUNCTION AND PURPOSE

This equipment is intended to heat food in commercial food service 
operations only. It is not intended for household, industrial, or 
laboratory use. 

It is intended to be used with induction-ready cookware. Performance 
is optimized with Vollrath induction-ready cookware. Other cookware 
may have different properties which may alter performance.

The Temperature Control Probe is intended to provide advanced 
temperature control. It is not intended to be used as a thermometer for 
measuring the temperature of food. The temperature control probe port 
is intended for use only with the Vollrath supplied probe. It is not a 
headphone jack. The USB port is intended for use only with the 
supplied USB flash drive.

WARNING

CAUTION

Item No.

Watts

Plug

Item No.

Watts

Plug

HPI4-2600

2600

NEMA 
6-20P

HPI4-300002

3000

Schuko

HPI4-3000

3000

HPI4-300003

UK

HPI4-3800

3800

HPI4-300004

China

HPI4-260002

2600

Schuko HPI4-380002

3800

Schuko

HPI4-260003

UK

HPI4-380003

UK

HPI4-260004

China

HPI4-380004

China

Содержание HPI4-2600













Отзывы: