High Power Countertop Induction Ranges with Temperature Control Probe Operator’s Manual
11
FUSE INSTRUCTION
The Troubleshooting section of this manual describes situations in
which the fuse may need to be replaced.
Determine Type of Fuse
• Internal Fuse - Contact Vollrath Technical Services for support.
Internal fuse cannot be serviced by customer.
• External Fuse - proceed to the Tools You Will Need Section to
replace fuse.
EXTERNAL FUSE REPLACEMENT
Tools You Will Need
• Small screwdriver.
• Towel or soft cloth.
• 314 20A fuse (Available on Vollrath.com and found at most
hardware stores).
1. Turn off and unplug the induction range.
2. Place a towel or soft cloth on a flat, stable surface.
3. Gently and carefully, lay the induction range, glass-side down, onto
the towel. Locate the fuse cap.
4. Using screwdriver; press down and turn the fuse holder cap to
release it from the range.
5. Remove the fuse from the holder.
6. Insert a replacement fuse into the holder.
7. Re-insert the holder and use the screwdriver to secure the cap into
the range.
8. Ensure the cap holder is locked into place.
INTERNAL FUSE REPLACEMENT
Note:
If induction range has an internal fuse you must contact Vollrath
Tech Services for support. Internal fuse cannot be serviced by
customer.
