6
If a maintenance reminder or a service reminder appears, the
backlight will brighten and constantly flash until the Reminder
Reset button is pressed or the service problem is corrected .
The Vollara Air & Surface Pro+ can be turned on or off, and adjusted, using the control panel on the front of the unit .
NOTE:
If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage
up to the total ventilated indoor area . Otherwise, set the coverage up to the size of the room . Do not exceed the size of the
ventilated indoor area when setting the purifier level .
The LED Screen is used to display all current settings (see
page 5) as well as any maintenance reminders .
NOTE:
If you are operating your central heating and
air conditioning fan or other ventilation system
continuously, set the coverage up to the total
ventilated indoor area . Otherwise, set the coverage up
to the size of the room . Do not exceed the size of the
ventilated indoor area when setting the purifier level .
POWER (stand by)
Turns the unit ON and OFF .
FAN UP/FAN DOWN
Adjusts the five speed fan .
AREA A·PURE+
Works when unit is in A·PURE + Mode to set the purifier level for the indoor area . The level is indicated by both a horizontal bar
graph and square footage . The unit will switch to A·PURE Mode, if the Purifier DOWN button is pressed .
A·PURE/A·PURE+
Toggles the unit between A·PURE Mode (ActivePure® and Ionization) and A·PURE+ Mode (ActivePure®, Ionization, and Purification
Plate) .
DEPART ROOM
Turns on and adjusts the timer for the Depart Room Mode . Each press of the Depart Room button will change the time by 2/4/8
hours, up to eight hours, then off . The Depart Room Mode should be operated in unoccupied areas only .
NOTE: “Unoccupied areas” includes pets. Some pets, like humans, may experience adverse reactions from exposure to
increased levels of ozone and should not be present during Depart Room Mode operation.
REMINDER RESET
Clears the maintenance reminders after performing routine maintenance .
SETTINGS & ADJUSTMENTS
LED DISPLAY
A·PURE /
A·PURE+
Power ON/OFF
Depart Room
ON/SET/OFF
Reminder Reset
sq . ft . UP
sq . ft . DOWN
Fan DOWN
Fan UP
Modes (A·PURE / A·PURE+ /
Depart Room)
Purifier Coverage /
Depart Time
Fan Speed
(5 Levels)
Ion
Operation
Flicker:
Replace ActivePure® Cell
Red Light:
ActivePure® Cell Malfunction
Clean Filter
Assembly