manualshive.com logo in svg

Volkswagen Transporter T5, Руководство пользователя, Страница: 26 / 83

Поделиться
Скачать
Volkswagen Transporter T5 Скачать руководство пользователя страница 26

The dimensions of the vehicle chassis can be gleaned from the diagrams. To aid your conversion plans, the chassis
dimensions are given in a scale of 1:20 and 1:10.
If uprated springs, comfort springs or tyre sizes that deviate from the standard specifications are fitted, the vehicle and
frame heights can change considerably from the base level. If this equipment is to be used, we ask you to please take this
fact into consideration.

Important note

The minimum distance between cab and body should be 30 mm.

• 

The rear overhang of the custom body should not exceed 43% of the wheelbase.

• 

Due to this restriction in length, the following custom body outer lengths should not be exceeded:

Wheelbase Standard body length, inner Wheelbase Standard body length, inner

Chassis with cab

3.000 mm

2.539 mm

2.692 mm

Chassis with cab

3.400 mm

2.939 mm

3.264 mm

Chassis with double cab 3.400 mm

2.169 mm

2.212 mm

The outer width of the cab is 1,902 mm. If standard type exterior mirrors are used, the body width should not exceed 2,200
mm.

Note: Subject to errors and technical amendments. The electronic version of the body guidelines is the decisive source of up-to-date data on body guidelines (online body
guidelines). Data status  August 2007

1

Содержание Transporter T5




















































































Отзывы:

Нет отзывов