vehicle identification on the tester.
To do so, press operating mode button and then
Guided Functions.
Refer to the corresponding work descriptions for the
continued sequence.
In order to return to Guided Fault Finding, press the
operating mode button and then Guided Fault
Finding.
Caution!
In any case, the vehicle must be returned to the
customer with DTC memory erased.
Static malfunction
If one or more static malfunctions are stored in data
memory, it is recommended to arrange with the customer
to repair this malfunction via Guided Fault Finding.
Sporadic malfunctions
In the event only sporadic malfunctions or notes are stored
in DTC memory and the customer has made registered no
complaint in conjunction with an electronic vehicle system,
erase DTC memory.
- Press the Continue > button again to enter the test
plan.
- Now end Guided Fault Finding via Go to button and then
End.
All DTC memories will be checked now once more.
In the window now appearing, it will be confirmed that all
sporadic DTCs were erased, diagnostic protocol is sent
"online" automatically.
Vehicle system test is completed.
CV joint boots, visual inspection
Perform the following work procedure:
Page 19 / 37
Description of work (part 1 of 2)
