47
Step 9
To install the hub cap, place it around the
lower part of the wheel center. With a
firm blow of your hand on the upper part,
the hub cap will snap into place. Make
sure it is properly seated.
Step 10
Step 8
Correct tightness of the wheel nuts is
important.
Then go crosswise from one nut to
another tightening them firmly with the
socket wrench and breaker bar.
Correctly tightened nuts should have a
torque of 90—100 ft. lbs. This torque can
be obtained with the socket wrench and
breaker bar by any person of average
strength. If in doubt about the correct
tightness of the wheel nuts, have it check-
ed with a torque wrench by your dealer or
at a service station.
Adjust the air pressure of the tire you have
just put on. For correct tire inflation
pressures, see the sticker behind the
driver’s seat.
Store the jack and tool kit under the front
passenger seat. See page 20 for instruc-
tions on how to reinstall the seat.
Содержание Campmobile 1973
Страница 1: ...Type 2 Volkswagen Owner s Manual Operation and Maintenance ...
Страница 2: ...Last name First name Initial Street Town State Zip code Area code Tel No Owner ...
Страница 84: ...82 ...
Страница 92: ...USA Typ 2 ...